Series of Articles on the FT-101B

This is a series of articles about my Yaesu FT-101B

My unit is from May 1974. It is almost entirely original, except for a few missing parts (microphone, rear connector, fan).

It is in excellent condition and worked quite well upon arrival, after spending a few hours connected through a series lamp.
However, it was clear that it needed some updates, such as replacing the film capacitors, among other small fixes.

In this series, we’ll see how it turns out.

Artículos de la serie FT101:

• FT-101B: Poli caps - Bill of materials for the VFO (Variable Frequency Oscillator) unit of the Yaesu FT-101B
• FT-101B: AF Unit BOM - Bill of materials for the Audio Frequency (AF) unit of the Yaesu FT-101B
• FT-101B: IF Unit BOM - Bill of materials for the Intermediate Frequency (IF) unit of the Yaesu FT-101B
• FT-101B: FIX Unit BOM - Bill of materials for the fixed crystal (FIX) unit of the Yaesu FT-101B
• FT-101B: MOD OSC Unit BOM - Bill of materials for the modulator and oscillator (MOD OSC) unit of the Yaesu FT-101B
• FT-101B: RF Unit BOM - Bill of materials for the RF (Radio Frequency) unit of the Yaesu FT-101B
• FT-101B: REG CAL Unit BOM - Bill of materials for the regulation and calibration (REG CAL) unit of the Yaesu FT-101B
• FT-101B: RECT Unit BOM - Bill of materials for the rectifier (RECT) unit of the Yaesu FT-101B
• FT-101B: VFO Unit BOM - Bill of materials for the VFO (Variable Frequency Oscillator) unit of the Yaesu FT-101B
• FT-101B: CHASSIS BOM - Bill of materials for the main chassis of the Yaesu FT-101B
• FT-101B: MIXER Unit BOM - Bill of materials for the MIXER unit of the Yaesu FT-101B
• FT-101B: NB Unit BOM - Bill of materials for the Noise Blanker (NB) unit of the Yaesu FT-101B